3.4 Programming the Camera Functions
3.4.1 Focus Control ([MENU] Button
_
Camera
_
Focus Control)
The Focus Control function is used to tune the sensitivity of the Auto Focus, or turn off the
automatic function entirely to conserve the lifespan of the lens in highly active (movement
heavy) areas.
1. Choose between Auto or Manual mode. Under Manual setting, focusing has to be done
manually with each zoom-in or zoom-out operation using the [Near]/[Far] buttons.
Note:
The ‘AUTO’ setting is highly recommanded for most environments. Under this set-
ting, changing the ‘AF SENSITIVITY’ from LOW to HIGH cuts down on the focusing time.
3.4.2 WB Control ([MENU] Button
_
Camera
_
WB Control)
The WB Control (White Balance) function is used to manually control the White Balance
by increasing or decreasing the ‘R’ (Red) or ‘B’ (Blue) color values. it can also be set to
‘AUTO’ (recommanded) or one of 4 pre-configured settings. The pre-configured settings
are as follows: INDOOR, OUTDOOR, ONE PUSH, or ATW.
Note:
R GAIN / B GAIN is only adjustable while in ‘MANUAL’ mode. ‘ONE PUSH’ feature
will focus only once when zooming on a subject. It will not auto-adjust continueously until
the next zoom operation.
FOCUS SETUP
MODE : AUTO
AF SENSITIVITY : HIGH
EXIT
MODE:
AUTO, MANUAL
AF SENSITIVITY:
HIGH, LOW
EXIT
WB SETUP
MODE : AUTO
R GAIN : N/A
B GAIN : N/A
EXIT MENU
MODE:
AUTO, INDOOR, OUTDOOR, ONE PUSH, ATW, MANUAL
R GAIN:
0~255
B GAIN:
0~255
EXIT
FOCUS
MODE : AUTO
AF SENSITIVITY : HIGH
EXIT
