NSK MEGATORQUE M-ESA-J0002V25, Руководство пользователя

Страница: 226 / 294

— 12-27 —
«
PA : Phase Adjust
Format : PA data
Data : 24 ~ 1 048
Shipping set : 700 (However, for non-interchangeable Motor, data varies with
individual Motor.)
Default : Not available
l
Sets the compensation value of the resolver installation position.
l
The resolver is set to the optimum installation position before shipment. Do not input PA in normal
use.
l
“TS” or “?PA” command reports the current setting.
«
PC : Pulse Command
Format : PC data
Data : 0 ~ 4
Shipping set : 0
Default : 0
l
Sets the format of the pulse train input.
PC0 : CW & CCW format
PC1 : Pulse & direction format
PC2 : øA/øB input, single format
PC3 : øA/øB input, duplex format
PC4 : øA/øB input, quadrature format
l
“TS” or “?PC” command reports the current setting.
PG : Position Gain
Format : PG data
Data : 0.010 ~ 1.000 or /AJ (adjusting mode)
Shipping set : 0.100
Default : Not available
l
Sets proportional gain of the position loop.
l
“TS” or “?PG” command reports the current setting.
l
“PG/AJ” command sets to the fine adjusting mode.
l
PG/AJ starts adjust mode.
l
It is automatically adjusted when LO data or SG data is changed.
l
LO data and SG data are cleared to 0 when PG data is changed.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com