NSK MEGATORQUE M-ESA-J0002V25, Руководство пользователя

Страница: 128 / 294

— 9-11 —
9.1.8.4. “IPOS” Output in Special Occasion
1 When 0 (Zero) movement operation is executed.
u
Example
When [AD0] or [AR0] is executed even the Motor is in the Home position, movement of the Motor is 0
(Zero). Followings show “IPOS” output states in such a case.
1) “IPOS” mode IS = 0
◊
There is no internal pulse output and “IPOS” output remains close if residual pulse of
position error counter are within “IN” value.
2) “IPOS” mode IS
≠
0
◊
Even no pulse is internally generated, “IPOS” output will be opened for the moment set by
“IS” value to check positioning stability.
3) “FIN” mode
◊
Even no pulse is generated internally, “IPOS” output signal shall always be returned for
positioning start command.
2 Sequential operation* for Programmable Indexer.
1) “IPOS” mode
◊
After the positioning is completed, execute next channel program, while “IPOS” output
remains open.
2) “FIN” mode
◊
After the positioning is completed, “IPOS” output closes for the moment which is set by
the parameter “FW,” then execute the next channel’s program after “IPOS” output is
opened again.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com