Novell LINUX ENTERPRISE SERVER 10 - INSTALLATION AND ADMINISTRATION 11-05-2007, Руководство по установке

Страница: 931 / 982

appears, look for a line, usually below the counter or somewhere at the bottom, men-
tioning the key to press to access the BIOS setup. Usually the key to press is
Del , F1 ,
or Esc . Press this key until the BIOS setup screen appears.
Procedure 51.1 Changing the BIOS Boot Sequence
1 Enter the BIOS using the proper key as announced by the boot routines and wait
for the BIOS screen to appear.
2 To change the boot sequence in an AWARD BIOS, look for the BIOS FEATURES
SETUP entry. Other manufacturers may have a different name for this, such as
ADVANCED CMOS SETUP. When you have found the entry, select it and confirm
with
Enter .
3 In the screen that opens, look for a subentry called BOOT SEQUENCE. The boot
sequence is often set to something like
C,A
or
A,C
. In the former case, the ma-
chine first searches the hard disk (C) then the floppy drive (A) to find a bootable
medium. Change the settings by pressing
PgUp or PgDown until the sequence is
A,CDROM,C
.
4
Leave the BIOS setup screen by pressing
Esc
. To save the changes, select SAVE
& EXIT SETUP or press
F10
. To confirm that your settings should be saved,
press
Y
.
Procedure 51.2 Changing the Boot Sequence in a SCSI BIOS (Adaptec Host
Adapter)
1 Open the setup by pressing Ctrl + A .
2 Select Disk Utilities, which displays the connected hardware components.
Make note of the SCSI ID of your CD-ROM drive.
3 Exit the menu with Esc .
4 Open Configure Adapter Settings. Under Additional Options, select Boot Device
Options and press
Enter .
5 Enter the ID of the CD-ROM drive and press Enter again.
6 Press Esc twice to return to the start screen of the SCSI BIOS.
Common Problems and Their Solutions 913