Novell LINUX ENTERPRISE SERVER 10 - INSTALLATION AND ADMINISTRATION 11-05-2007, Руководство по установке

Страница: 416 / 982

20.3 Configuring the Boot Loader with
YaST
The easiest way to configure the boot loader in your SUSE Linux Enterprise system is
to use the YaST module. In the YaST Control Center, select System > Boot Loader. As
in
Figure 20.1, “Boot Loader Settings” (page 398), this shows the current boot loader
configuration of your system and allows you to make changes.
Figure 20.1 Boot Loader Settings
Use the Section Management tab to edit, change, and delete boot loader sections for
the individual operating systems. To add an option, click Add. To change the value of
an existing option, select it with the mouse and click Edit. To remove an existing entry,
select it and click Delete. If you are not familiar with boot loader options, read
Sec-
tion 20.2, “Booting with GRUB” (page 388) first.
Use the Boot Loader Installation tab to view and change settings related to type, location,
and advanced loader settings.
398 Installation and Administration