Novell LINUX ENTERPRISE SERVER 10 - INSTALLATION AND ADMINISTRATION 11-05-2007, Руководство по установке

Страница: 501 / 982

Table 26.1 Sections in /etc/X11/xorg.conf
Meaning Type
The paths used for fonts and the RGB color table.
Files
General switches.
ServerFlags
A list of modules the server should load.
Module
Input devices, like keyboard, mouse, and special input devices
(touchpads, joysticks, etc.), are configured in this section. Impor-
InputDevice
tant parameters in this section are
Driver
and the options
defining the
Protocol
and
Device
.
The monitor used. The individual elements of this section are
the name, which is referred to later in the
Screen
definition,
Monitor
the
Bandwidth
, and the synchronization frequency limits
(
HorizSync
and
VertRefresh
). Settings are given in MHz,
kHz, and Hz. Normally, the server refuses any modeline that
does not correspond with the specification of the monitor. This
prevents too high frequencies from being sent to the monitor by
accident.
The modeline parameters for the specific screen resolutions.
These parameters can be calculated by SaX2 on the basis of the
Modes
values given by the user and normally do not need to be changed.
Intervene manually at this point if, for example, you want to
connect a fixed frequency monitor. Find details of the meaning
of individual number values in the HOWTO files in
/usr/
share/doc/howto/en/html/
XFree86-Video-Timings-HOWTO
(the package
howtoenh
must be installed).
A specific graphics card. It is referenced by its descriptive name.
Device
Combines a
Monitor
and a
Device
to form all the necessary
settings for X.Org. In the
Display
subsection, specify the size
Screen
The X Window System 483