Novell LINUX ENTERPRISE SERVER 10 - INSTALLATION AND ADMINISTRATION 11-05-2007, Руководство по установке

Страница: 762 / 982

matching
ServerName
entry of one of the virtual host declarations. If no matching
ServerName
is found, the first specified virtual host is used as a default.
The directive
NameVirtualHost
tells Apache on which IP address and, optionally,
which port to listen for requests by clients containing the domain name in the HTTP
header. This option is configured in the configuration file
/etc/apache2/listen
.conf
.
The first argument can be a fully qualified domain name, but it is recommended to use
the IP address. The second argument is the port and is optional. By default, port 80 is
used and is configured via the
Listen
directive.
The wild card
*
can be used for both the IP address and the port number to receive re-
quests on all interfaces. IPv6 addresses must be enclosed in square brackets.
Example 40.1 Variations of Name-Based VirtualHost Entries
# NameVirtualHost IP-address[:Port]
NameVirtualHost 192.168.1.100:80
NameVirtualHost 192.168.1.100
NameVirtualHost *:80
NameVirtualHost *
NameVirtualHost [2002:c0a8:164::]:80
The opening
VirtualHost
tag takes the IP address (or fully qualified domain name)
previously declared with the
NameVirtualHost
as an argument in a name-based
virtual host configuration. A port number previously declared with the
NameVirtualHost
directive is optional.
The wild card * is also allowed as a substitute for the IP address. This syntax is only
valid in combination with the wild card usage in
NameVirtualHost *
. When using
IPv6 addresses, the address must be included in square brackets.
744 Installation and Administration