Novell LINUX ENTERPRISE SERVER 10 - INSTALLATION AND ADMINISTRATION 11-05-2007, Руководство по установке

Страница: 124 / 982

archs
Specify the hardware architectures on which this workflow should be used.
Example 6.3 Configuring the List of Workflow Components
<modules config:type="list">
❶
<module>
❷
<label>Language</label>
❸
<enabled config:type="boolean">false</enabled>
❹
<name>firstboot_language</name>
❺
</module>
<modules>
❶
The container for all components of the workflow.
❷
The module definition.
❸
The label displayed with the module.
❹
The switch to enable or disable this component in the workflow.
❺
The module name. The module itself must be located under
/usr/share/
YaST2/clients
and have the
.ycp
file suffix.
To make changes to the number or order of proposal screens during the firstboot instal-
lation, proceed as follows:
1 Open the firstboot configuration file at
/etc/YaST2/firstboot.xml
.
2
Delete or add proposal screens or change the order of the existing ones:
• To delete an entire proposal, remove the
proposal
element including all
its subelements from the
proposals
section and remove the respective
module
element (with subelements) from the workflow.
• To add a new proposal, create a new
proposal
element and fill in all the
required subelements. Make sure that the proposal exists as a YaST module
in
/usr/share/YaST2/clients
.
• To change the order of proposals, move the respective
module
elements
containing the proposal screens around in the workflow. Note that there may
be dependencies to other installation steps that require a certain order of
proposals and workflow components.
106 Installation and Administration