Novell LINUX ENTERPRISE SERVER 10 - INSTALLATION AND ADMINISTRATION 11-05-2007, Руководство по установке

Страница: 613 / 982

Example 30.12 Output of the route -n Command
route -n
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
10.20.0.0 * 255.255.248.0 U 0 0 0 eth0
link-local * 255.255.0.0 U 0 0 0 eth0
loopback * 255.0.0.0 U 0 0 0 lo
default styx.exam.com 0.0.0.0 UG 0 0 0 eth0
For more options and information about using route, enter
route -h
or see the
route
(8)
man page.
30.6.3 Start-Up Scripts
Apart from the configuration files described above, there are also various scripts that
load the network programs while the machine is booting. These are started as soon as
the system is switched to one of the multiuser runlevels. Some of these scripts are de-
scribed in
Table 30.9, “Some Start-Up Scripts for Network Programs” (page 595).
Table 30.9 Some Start-Up Scripts for Network Programs
This script handles the configuration of the network
interfaces. The hardware must already have been ini-
/etc/init.d/network
tialized by
/etc/init.d/coldplug
(via
hotplug
). If the
network
service was not started,
no network interfaces are implemented when they are
inserted via hotplug.
Starts xinetd. xinetd can be used to make server ser-
vices available on the system. For example, it can
start vsftpd whenever an FTP connection is initiated.
/etc/init.d/inetd
Starts the portmapper needed for the RPC server, such
as an NFS server.
/etc/init.d/portmap
Starts the NFS server.
/etc/init.d/
nfsserver
Controls the postfix process.
/etc/init.d/postfix
Basic Networking 595