Novell LINUX ENTERPRISE SERVER 10 - INSTALLATION AND ADMINISTRATION 11-05-2007, Руководство по установке

Страница: 74 / 982

5 Select Add Host and enter the hostnames of the machines to which to export the
installation data. Instead of specifying hostnames here, you could also use wild
cards, ranges of network addresses, or just the domain name of your network.
Enter the appropriate export options or leave the default, which works fine in
most setups. For more information about the syntax used in exporting NFS shares,
read the
exports
man page.
6 Click Finish. The NFS server holding the SUSE Linux Enterprise installation
sources is automatically started and integrated into the boot process.
If you prefer manually exporting the installation sources via NFS instead of using the
YaST NFS Server module, proceed as follows:
1 Log in as
root
.
2 Open the file
/etc/exports
and enter the following line:
/productversion *(ro,root_squash,sync)
This exports the directory
/ productversion
to any host that is part of this
network or to any host that can connect to this server. To limit the access to this
server, use netmasks or domain names instead of the general wild card
*
. Refer
to the
export
man page for details. Save and exit this configuration file.
3 To add the NFS service to the list of servers started during system boot, execute
the following commands:
insserv /etc/init.d/nfsserver
insserv /etc/init.d/portmap
4 Start the NFS server with
rcnfsserver start
. If you need to change the
configuration of your NFS server later, modify the configuration file and restart
the NFS daemon with
rcnfsserver restart
.
Announcing the NFS server via OpenSLP makes its address known to all clients in
your network.
1
Log in as
root
.
2 Enter the directory
/etc/slp.reg.d/
.
56 Installation and Administration