Novell LINUX ENTERPRISE SERVER 10 - INSTALLATION AND ADMINISTRATION 11-05-2007, Руководство по установке

Страница: 225 / 982

Procedure 10.1 Booting from the Service Pack Medium
1
Insert the first SUSE Linux Enterprise SP medium (CD 1 or DVD 1) and boot
your machine. A boot screen similar to the original installation of SUSE Linux
Enterprise 10 is displayed.
2 Select Installation and continue as outlined in the YaST installation instructions
in
Chapter 3, Installation with YaST (page 17).
Network Installation
Before starting a network installation of an SUSE Linux Enterprise SP, make sure that
the following requirements are met:
• A network installation source set up according to Section 10.2.1, “Setting Up a
Network Installation Source for Service Pack Media” (page 206).
• A working network connection both on the installation server and the target machine
that includes a name service, DHCP (optional, but needed for PXE boot), and
OpenSLP (optional).
• The SUSE Linux Enterprise SP CD 1 or DVD 1 to boot the target system or a target
system set up for PXE boot according to Section 4.3.5, “Preparing the Target System
for PXE Boot” (page 71).
Network Installation—Boot from CD or DVD
To perform a network installation using the SP CD or DVD as the boot medium, proceed
as follows:
1
Insert the SUSE Linux Enterprise SP CD 1 or DVD 1 and boot your machine.
A boot screen similar to the original installation of SUSE Linux Enterprise 10
is displayed.
2 Select Installation to boot the SP kernel then use F3 to select a type of network
installation source (FTP, HTTP, NFS, or SMB).
3 Provide the appropriate path information or select SLP as the installation source.
Updating SUSE Linux Enterprise 207