Novell LINUX ENTERPRISE SERVER 10 - INSTALLATION AND ADMINISTRATION 11-05-2007, Руководство по установке

Страница: 64 / 982

• Controlling system with working network connection and VNC viewer software
or Java-enabled browser (Firefox, Konqueror, Internet Explorer, or Opera)
• Physical boot medium (CD, DVD, or custom boot disk) for booting the target system
• Running DHCP server providing IP addresses
To perform this kind of installation, proceed as follows:
1 Set up the installation source as described in Section 4.2, “Setting Up the Server
Holding the Installation Sources” (page 52). Choose an NFS, HTTP, or FTP
network server. For an SMB installation source, refer to Section 4.2.5, “Managing
an SMB Installation Source” (page 60).
2 Boot the target system using the first CD or DVD of the SUSE Linux Enterprise
media kit.
3 When the boot screen of the target system appears, use the boot options prompt
to set the appropriate VNC options and the address of the installation source.
This is described in detail in
Section 4.4, “Booting the Target System for Instal-
lation” (page 72).
The target system boots to a text-based environment, giving the network address
and display number under which the graphical installation environment can be
addressed by any VNC viewer application or browser. VNC installations announce
themselves over OpenSLP and can be found using Konqueror in
service:/
or
slp:/
mode.
4 On the controlling workstation, open a VNC viewing application or Web
browser and connect to the target system as described in
Section 4.5.1, “VNC
Installation” (page 77).
5 Perform the installation as described in Chapter 3, Installation with YaST
(page 17). Reconnect to the target system after it reboots for the final part of the
installation.
6
Finish the installation.
46 Installation and Administration