Novell LINUX ENTERPRISE SERVER 10 - INSTALLATION AND ADMINISTRATION 11-05-2007, Руководство по установке

Страница: 91 / 982

4.4.1 Using the Default Boot Options
The boot options are described in detail in Chapter 3, Installation with YaST (page 17).
Generally, just selecting Installation starts the installation boot process.
If problems occur, use Installation—ACPI Disabled or Installation—Safe Settings. For
more information about troubleshooting the installation process, refer to
Section 51.2,
“Installation Problems” (page 910).
4.4.2 Using the F Keys
The menu bar at the bottom screen offers some advanced functionality needed in some
setups. Using the F keys, you can specify additional options to pass to the installation
routines without having to know the detailed syntax of these parameters (see
Sec-
tion 4.4.3, “Using Custom Boot Options” (page 74)).
See the table below for a complete set of the options available.
Table 4.1 F Keys During Installation
Default Value Available Options Purpose Key
None None Provide help F1
English All supported languages Select the installation
language F2
Change screen resolu-
tion for installation F3 • • Text mode Default value
depends on
• VESA
your graphics
hardware
• resolution #1
• resolution #2
• ...
Remote Installation 73