Novell LINUX ENTERPRISE SERVER 10 - INSTALLATION AND ADMINISTRATION 11-05-2007, Руководство по установке

Страница: 601 / 982

Function Command Configura-
tion Stage
getcfg
can be used to query the inter-
face name associated with a configuration
getcfg
Interface
name or a hardware description. More
information is available in the manual
page of
getcfg
.
The
if*
scripts start existing network
interfaces or return the status of the
if{up,down,status}
Interface
specified interface. More information is
available in the manual page of
ifup
.
More information about hotplug and persistent device names is available in Chapter 24,
Dynamic Kernel Device Management with udev (page 461).
30.6.1 Configuration Files
This section provides an overview of the network configuration files and explains their
purpose and the format used.
/etc/syconfig/hardware/hwcfg-*
These files contain the hardware configurations of network cards and other devices.
They contain the needed parameters, such as the kernel module, start mode, and script
associations. Refer to the manual page of
hwup
for details. Regardless of the existing
hardware, the
hwcfg-static-*
configurations are applied when coldplug is started.
/etc/sysconfig/network/ifcfg-*
These files contain the configurations for network interface. They include information
such as the start mode and the IP address. Possible parameters are described in the
manual page of
ifup
. Additionally, all variables from the files
dhcp
,
wireless
,
and
config
can be used in the
ifcfg-*
files if a general setting should be used for
only one interface.
Basic Networking 583