Novatest S.r.l.
Manual for Multichannel Ultrasonic Pile Integrity Tester
124
velocity is unlike at some point, the value of wave speed will be
displayed in red shading; If the amplitude of wave is suspicious,
it will be displayed in grey.
Figure 6.5 Ultrasonic Data List
In the Ultrasonic data list area, press the data row to display
them in yellow, the waveform in the Waveform area will change into
that of the test point, while the location of the test point will be
displayed in the Defects schematic graph area.
In the Ultrasonic data list area, certain spacing test, instead of
other values that are obtained by calculation, can be modified in the
table directly. Press the area where the spacing test data cell to be
modified is and pop up the digital soft keyboard to enter a new value.
Automatic calculation will be restarted after the data is modified.
The following operations can be also conducted in the
