Norwood The Grain Handler 10 Скачать руководство пользователя страница 64

Страница: 64 / 130

3 - INSTALLATION

3-24

Inclined Powerhead Installation

The Inclined Powerhead provides power to the U-Trough and

Power Sweep.

Use the following instructions to install the Inclined Power

head.

MODELS:

8” U Trough Powersweeps

802-19-1102U, 802-21-1102U, 802-24-1102U, 802-27-1102U,

802-30-1102U, 802-33-1102U, 802-36-1102U, 802-42-1102U,

802-48-1102U

10” U Trough Powersweeps

102-19-1102U, 102-21-1102U, 102-24-1102U, 102-27-1102U,

102-30-1102U, 102-33-1102U, 102-36-1103U, 102-42-1104U,

102-48-1104U, 102-54-1104U, 102-60-1105U

Estimated Completion Time:

30 Min’s.

DANGER

ROTATING AUGER HAZARD KEEP AWAY

To prevent serious injury or death from rotating

augers:

1. Do not enter bin unless power is locked out.

2. Turn machine OFF, shut down and lock out power

source, unplug power cord and wait for all moving parts

to stop before inspecting, servicing or repairing machine.

3. Keep body, hair, and clothing away from moving parts.

4. Stay away from rotating augers. Keep others away.

FAILURE TO HEED THIS WARNING MAY CAUSE

SERIOUS INJURY OR DEATH.

DANGER

NEVER ENTER BIN UNLESS ALL POWER IS LOCKED

OUT AND ANOTHER PERSON IS PRESENT.

Exposed auger and moving parts can cause severe in-

jury or death. Rotating augers are dangerous! Flowing

grain may trap and suffocate.

FAILURE TO HEED THIS WARNING MAY CAUSE SERI-

OUS INJURY OR DEATH.

1. Follow steps 1-9 to install the Inclined Powerhead,

(See"Horizontal Powerhead Installation" on page 3-17)

then proceed to the next step on this page.

2. Support the

"Inclined Powerhead"

with a

"Lifting

Strap"

or equivalent.

(See Fig. # 3-60)

Fig. # 3-60 Support Inclined Powerhead

Содержание The Grain Handler 10



































































































































Результаты поиска

Содержание The Grain Handler 10

Отзывы:

Norwood The Grain Handler 10, Руководство оператора, Страница: 64 / 130

Результаты поиска

Содержание The Grain Handler 10

Отзывы: