Norwood The Grain Handler 10, Руководство оператора, Страница: 45 / 130

3 - INSTALLATION
3-5
10. If already installed, remove the "Power Sweep Engage-
ment Lever"
11
, and all of the "Lever Hardware"
12
securing it.
(See Fig. # 3-9)
12
12
12
12
11
12
Fig. # 3-9 Remove the "Power Sweep Engagement Lever"
NOTE
If installing in an existing grain bin with a full aeration
floor, it may be necessary to remove about half of the
floor.
NOTE
The aeration floor planks must run perpendicular to
U-Trough Tube.
Fig. # 3-10 Grain Bin With Half of the Aeration Floor Re-
moved / Installed
11. Move the "U-Trough Tube"
7
inside the grain bin
"Center Hopper Sump" end first.
12. Insert the discharge end of the "U-Trough Tube"
7
through the hole you cut in the grain bin.
(See Fig. # 3-11)
7
Fig. # 3-11 Insert "U-Trough Tube" Through the Hole
13. Measure and center the
"Splined Gearbox Output
Shaft" 11 with the exact center of the grain bin.
(See
Fig. # 3-12) (See Fig. # 3-13)
11
Fig. # 3-12 Center The Splined Gearbox Output Shaft With
the Center of the Grain Bin