Norwood Kwik-Pit 26 Series, Руководство оператора

Страница: 49 / 133

3 - TRANSPORT OPERATIONS
3-3
Drawbar Requirements
See Drawbar Requirements in Preparing Machine section.
(See “Drawbar Requirements” on page 3-3)
Secure Three-Point Hitch
If equipped with a quick coupler
A
, raise the 3-point hitch fully.
If not equipped with quick coupler, secure lift links
B
and
center link
C
so they do not swing into the tractor tires or
hoses.
(See Fig. # 3-48)
A
- Quick Coupler
B
- Lift Link (2 used)
C
- Center Link
C B B A
Fig. # 3-4 Secure Three-Point Hitch
Position Drawbar
Fig. # 3-5 Standard Drawbar in Transport Position
CAUTION
Avoid personal injury or death to you or others due to
lost machine steering control. Always pin the drawbar
in the center position for all tractors when transporting
machine.
1. Two-Wheel Drive Tractors: Place drawbar in fixed, cen -
tered, and down position.
2. Four-Wheel Drive and Tracked Tractors: Place drawbar
in fixed, center position for transport. Leave one hole
clearance on each side of drawbar for field operation only.
3. Wide-Swing Drawbar: Place drawbar in fixed, center
position for transport. Place the stop blocks on storage
brackets for field operation.