Norwood Kwik-Pit 26 Series, Руководство оператора

Страница: 63 / 133

4 - WORKING OPERATIONS
4-5
CONTROLS
Before starting to work, all operators should familiarize them -
selves with the location and function of the controls.
Jack
1. The “Jack”
A
is used to raise and lower the machine
in conjunction with the “Lift Axle Raise / Lower Control
Lever”
(See Fig. # 4-4)
if the operator intends to keep
the machine parallel to the ground for transporting. The
“Jack”
A
is also used to raise the “ Kwik-Pit Hitch”
B
to the towing vehicles drawbar height. The “Jack”
A
is
located where shown.
(See Fig. # 4-3)
C
B
Turn CCW To
Lower Hitch End
Turn CW To
Raise Hitch End
D
A
E
F
Fig. # 4-3 Jack
Fig. # 4-4 Lift Axle Raise / Lower Control Lever Location
Lower
Raise
Lift Axle Raise /
Lower Control
Lever
HOPPER FLAPS
RAISE LOWER
LEVER LIFT AXLE
RAISE LOWER
LEVER
90-44-0565
2. The “Jack”
A
is removable. If the operator has a need to
remove the jack for operational purposes, or maintenance,
follow the next steps.
(See Fig. # 4-3)
3. Turn the “Jack Handle”
E
counter clockwise (CCW) to
lower the machine so the “Driveover Ramp”
F
is on the
ground, or support with blocks.
(See Fig. # 4-3)
4. Remove “Pin”
C
which secures the “Jack”
A
to the
“Jack Mount Tube”
D
.
(See Fig. # 4-3)