Nordson HORIZON 200, Руководство по эксплуатации продукта

Страница: 19 / 124

Description
2-7
Part 106913 − 04
E
2018 Nordson Corporation
Typical System Options
Options include those described below. Contact your Nordson Corporation
representative for further information on these and other options.
Item numbers in Table 2-4 correspond to callouts in Figure 2-3.
Table 2-4 Typical System Options
Item Equipment Description
1 Air dryer Removes moisture from the system air supply. Most systems
use regenerative-desiccant or refrigerated air dryers.
2 Gun movers Use oscillators or reciprocators to move automatic spray guns
in a repetitive pattern for better workpiece coverage. Gun
movers may also be equipped to move the spray guns toward
and away from the workpieces.
3 Powder drum unloaders Transfer powder from shipping drums to feed hoppers or color
modules.
4 Color change
equipment
Consists of additional color modules, feed hoppers, sieves and
accumulators. These contain different powders for quick
changes.
— Roll on/roll-off
equipment
Move the booth and attached equipment on and off the
conveyor line. Manual and powered equipment movers are
available.
— Advanced automation
systems
Identify and track parts on the conveyor line; control
automatic-gun movement, triggering, air pressure, and
voltage. Also gather data on system operation and generate
reports.
— Airflow Management
System
Automatically controls air flow through the booth, using a
variable-speed motor control and pressure sensors.