Nordson HORIZON 200, Руководство по эксплуатации продукта

Страница: 13 / 124

Description
2-1
Part 106913 − 04
E
2018 Nordson Corporation
Section 2
Description
Introduction
This manual covers Horizon 200 and 400 powder coating systems. It
includes booth operation, maintenance, troubleshooting, repair procedures,
and lists of serviceable parts. Other components of your system are
covered in separate manuals.
System Configuration
This manual covers a basic, manually operated powder coating system. The
illustrations show a Horizon 400 system. The Horizon 200 system is
smaller, but has the same basic components. Additionally, your system may
have optional equipment not described in this manual, such as the
Smart-Coat system or other advanced control systems.
Systems are either permanently located under the conveyor, or mounted on
casters and rails (roll-on/roll-off system). Roll-on/roll-off systems can be
moved off-line for powder changes or maintenance.
Figure 2-1 illustrates the operation of the typical system. Figures 2-2
through 2-5 show the equipment and controls used in a typical system. You
should also review the engineering drawings (plan views and schematics)
furnished with your system.