Nordson HORIZON 200, Руководство по эксплуатации продукта

Страница: 16 / 124

Description
2-4
Part 106913 − 04
E 2018 Nordson Corporation
System Equipment
A typical system includes the equipment described below. Your system may
have different equipment, or the equipment may be installed in locations
different from those shown in the illustrations.
Recovery and Reclaim Equipment
Item numbers in Table 2-1 correspond to callouts in Figure 2-2.
Table 2-1 Recovery and Reclaim Equipment
Item Equipment Description
1 Booth enclosure
(canopy)
Contains the sprayed powder within the booth. It has a
conveyor slot in the roof, exit and entry vestibules at each end,
and slots and openings in the sides for automatic and manual
spray guns.
7 Booth base Supports the enclosure and houses the exhaust fan, motor,
fan damper, cartridge filter pulse valves and air manifold, and
final filters. A covered tray running around the top edge of the
base houses the system wiring and pneumatic plumbing.
10 Transfer pumps Pump the reclaimed powder from the color module hoppers to
the accumulator. A three-position switch on the system
electrical panel controls pump operation.
14 Color module Houses the cartridge filters, fluidizing plates and pans, and
transfer pumps. Oversprayed powder accumulates in hoppers
in the bottom of the module. A baffle plate covers the
cartridge filters. A steel mesh grill covers the top of the
module. A D-gasket seals the joint between the color module
and the fan compartment.
15 Sieve Screens the reclaimed powder. Discards powder particles and
clumps too large to pass through the sieve screen. Electrically
driven rotary sieves or air-powered vibratory sieves are
available.
16 Accumulator Collects the reclaimed powder pumped from the color module
by the transfer pumps. The accumulator provides multiple
inlet connections for the transfer hoses. It is vented into the
color module.