Nordson HORIZON 200, Руководство по эксплуатации продукта

Страница: 121 / 124

Specifications
9-1
Part 106913 − 04
E
2018 Nordson Corporation
Section 9
Specifications
Dimensions and Capacities
NOTE:
Equipment specifications are subject to change without notice due
to continuing technological and quality improvements.
Refer to Table 9-1 for the dimensions and capacities of the Horizon 200 and
400 powder coating systems.
Table 9-1 Dimensions and Capacities
Dimensions and Capacities Horizon 200 Horizon 400
Overall dimensions
Height (add part height) 163 cm (64 in.) 198 cm (78 in.)
Width 152 cm (60 in.) 182 cm (72 in.)
with optional gun vestibules 244 cm (96 in.)
with platforms 457 cm (180 in.)
Length 508 cm (200 in.) 680 cm (268 in.)
Fan
High flow 2920 rpm/2750 cfm 2680 rpm/5500 cfm
Low flow 2630 rpm/2000 cfm 2400 rpm/4000 cfm
Fan motor 5 hp/1750 rpm 7.5 (L) or 10 (H) hp/1750
rpm
Number of cartridge filters 4 8
Number of final filters 2 4
Number of pulse valves 2 4
Maximum air pressure 7 bar (100 psig) 7 bar (100 psig)
Manual/auto gun capacity 1/6 or 2/8 2/10
Operating Environment
Locate your powder coating system in a proper environment. If temperature
and humidity in the spray room exceed the following ranges, you must
install air conditioning equipment.
Temperature 21 − 26
_
C (70 − 80
_
F)
Humidity 45 − 55% RH