NORDAC SK 5xxE Manual
68
Subject to technical alterations
BU 0500 GB
Availability of the parameters
Due to certain configurations, the parameters are subject to certain conditions. The following tables (from
Section. 5.1 onwards) list all parameters together with the particular information.
exam
ple
Parameter
Set value / Description / Note
Device
Supervisor
Parameter
set
P000 … - 01
… - 02
...
Operating parameter display
520E S P
0.01 ... 9999
[ 0 ]
In the display of the SimpleBox (SK CSX-0) or the ControlBox (SK TU3-CTR, the operating value
selected in parameter P001 is displayed
online
.
Information about the operating status of the drive can be read out as required.
Array parameter display
Some parameters have the option of displaying settings and views in several
levels (arrays). After the parameter is selected, the array level is displayed and
must then also be selected.
If the ControlBox is used, the array level is shown by
_ - 0 1
. With the
ParameterBox (picture on right) the selection options for the array level appear
at the top left of the display.
For parameterisation with ControlBox SK TU3-CTR:
P _ 0 1
P 5 0 2
P _ 0 2
o f f
o f f
Setting:
Value of leading function 1
Setting:
Value of leading function 2
EN T ER
E NT E R
E NT E R
VA L U E
Parameter selection in P100 dependent
on the parameter set
Parameter number
Parameter Text
Supervisor parameters (S) are dependent
on the settings in P003
Array values
Parameter value range
Factory settings of parameter
Only available with types
≥
SK 5xxE
ParameterBox SK TU3-PAR
