8
Additional information
BU 0500 GB
155
8.7 Maintenance and servicing information
In normal use, NORDAC 5xxE frequency inverters are maintenance free. Please note the "general data" in
Section 7.1.
If the frequency converter is being used in a dusty environment, then the cooling-vane surfaces should be
regularly cleaned with compressed air. If air intake filters have been built into the control cabinet, then these
should also be regularly cleaned or replaced.
If you contact our technical support, please have the precise device type (rating plate/display), accessories
and/or options, the software version used (P707) and the series number (rating plate) at hand.
Repairs
The device must be sent to the following address if it needs repairing:
NORD Electronic DRIVESYSTEMS GmbH
Tjüchkampstraße 37
26605 Aurich, Germany
For queries about repairs, please contact:
Getriebebau NORD GmbH & Co. KG
Telephone: 04532 / 401-515
Fax: 04532 / 401-555
If a frequency inverter is sent in for repair, no liability can be accepted for any added components, e.g. such as
mains cables, potentiometer, external displays, etc.!
Please remove all non-original parts from the frequency inverter.
NOTE
If possible, the reason for returning the component/device should be stated. If necessary, at least
one contact should be stated in case of queries.
This is important in order to keep repair times as short and efficient as possible.
On request you can also obtain a suitable return good voucher from Getriebebau NORD.
Internet information
You can find the comprehensive manuals in German and in English on our Internet site.
www.nord.com
You can also obtain this manual from your local representative if necessary.
