Chapter 8
Capturing Images with Advanced Setting Menu
59
Photogr
ap
hin
g and
Playi
ng Image
s
8.2.1
Using Scene Modes and Custom Setting
DS-L3 has “scene modes”, which are photographing conditions for typical subjects. You can photograph a subject with a
suitable setting by selecting an appropriate scene mode.
You can save up to seven items of photographing conditions as “custom settings”, which can be retrieved and used like
scene modes.
Disabling scene modes and custom settings
A selected scene mode or custom setting cannot be disabled in the [SCENE/CSM] submenu. To disable the
selection, press the [CLR SET] button of the [CAM MENU: NR/SD/SET] screen to clear settings.
(1) Using a scene mode
You may want to adjust the contrast or hue in accordance with the photographed subject, or may want to photograph with
desired settings.
For typical subject, several image capture conditions are provided as “scene modes”. Selecting a scene mode enables you to
capture images with the settings suitable to the subject. Select a scene mode in accordance with the subject.
1
Press the [SCENE/CSM] button of [CAM MENU].
The [SCENE] submenu appears.
Displayed on the left of the submenu are the [CANCEL]
button and scene mode selection buttons, on the right are
[CSM1] to [CSM7] buttons.
2
Press the corresponding button to select a scene
mode.
The submenu closes, and the selected scene mode is
displayed on the [SCENE/CSM] button of [CAM MENU]. To
cancel the selection, press the [CANCEL] button of the
submenu.
Note: The scene mode displayed on the submenu changes
according to the setting of [Select scenes] of the
[SETUP MENU: MAIN] screen. Refer to “13.2.1 (2)
Changing preset of scene mode” for how to change
the selection of the scene.
3
Confirm that the scene mode name is displayed in the
comment area of [CAM MENU].
It is displayed for [CAM MENU] or [VIEW MENU]. It is not
displayed when it is disabled.
Using a scene mode
Settings at the power-on time
The selected scene mode is saved when the power is turned off and the saved scene mode will be applied when the
power is turned on again. However, if the custom setting is set to be enabled at the time of startup, the custom mode
setting will be applied.
For details, refer to “13.2.1 (1) Calling custom settings on startup”.
Changing the scene mode setting
•
After selecting a scene, you can change the settings such as the exposure mode, exposure compensation,
camera gain, and exposure time. However, those changes cannot be saved to the scene mode.
•
To save an arbitrary setting, use “Custom Setting”. For details about registering a custom setting, see “8.3.3 (4)
Registering a custom setting”.
1
2
Cancel the
selection
Select a
scene mode
Содержание DS-L3
Страница 2: ......
