manualshive.com logo in svg

NI PXI-4204, Руководство пользователя

Поделиться
Скачать
NI PXI-4204 Скачать руководство пользователя страница 10

Chapter 1

About the NI PXI-4204

©

 National Instruments Corporation

1-3

NI PXI-4204 User Manual

•

SCXI Quick Start Guide

—This document describes how to set up 

an SCXI chassis, install SCXI modules and terminal blocks, and 
configure the SCXI system in MAX.

•

PXI or PXI/SCXI combination chassis manual—Read this manual 
for maintenance information about the chassis and for installation 
instructions.

•

Accessory installation guides or manuals—If you are using accessory 
products, read the terminal block installation guides. It explain how to 
physically connect the relevant pieces of the system. Consult this guide 
when you are making the connections.

•

Software documentation—You may have both application software 
and NI-DAQmx software documentation. NI application software 
includes LabVIEW, Measurement Studio, and LabWindows/CVI. 
After you set up the hardware system, use either your application 
software documentation or the NI-DAQmx documentation to help you 
write your application. If you have a large, complicated system, it is 
worthwhile to look through the software documentation before you 
configure the hardware.

Installing the Application Software, NI-DAQ, and the 
DAQ Device

Refer to the 

DAQ Getting Started Guide

, packaged with the NI-DAQ 

software, to install your application software and NI-DAQ driver software.

NI-DAQ 7.0 or later is required to configure and program the NI PXI-4204 
device. If you do not have NI-DAQ 7.0 or later, you can either contact an 
NI sales representative to request it on a CD or download the latest NI-DAQ 
version from 

ni.com

.

Installing the NI PXI-4204

Note

Refer to the 

Read Me First: Safety and Radio-Frequency Interference

 document 

before removing equipment covers or connecting or disconnecting any signal wires.

Refer to the 

DAQ Getting Started Guide

 to unpack, install, and configure 

the NI PXI-4204 in a PXI chassis and then to the 

SCXI Quick Start Guide

 

if you are using a PXI/SCXI combination chassis.

Содержание PXI-4204




















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды