NF ZM2371, Инструкция по эксплуатации

Страница: 59 / 255

3.5 Basic Operations
3-29 ZM2371/ZM2372
3.5.5.3 Setting of Secondary Parameters
_ Sec _
Press the
_ Sec _
key to display the secondary parameter selection menu (see below), and
select a secondary parameter with a numeric key.
S e c o n d a r y pa r a m e t e r : D
Current setting
0)Q 1)D 2)
θ
3)X 4)B 5)Rs >NEXT
Options (first page)
6)Rp 7)G 8)Lp 9)Rdc <PREV
Options (second page)
Q
Quality factor (
＝
1/D)
D
Dissipation factor (= tan  )
θ
Phase angle of impedance (unit: degree)
X
Reactance Xs expressed with series equivalent circuit (unit:  )
B
Susceptance Bp expressed with parallel equivalent circuit (unit: S)
Rs
Resistance Rs expressed with series equivalent circuit (unit:  )
Rp
Resistance Rp expressed with parallel equivalent circuit (unit:  )
G
Conductance Gp expressed with parallel equivalent circuit (unit: S)
Lp
Inductance Lp expressed with parallel equivalent circuit (unit: H)
Rdc
Direct-current resistance Rdc (unit:

)
Any secondary parameters can be selected regardless of a setting of equivalent circuit.
If a setting is made or the EXIT operation is performed, the measurement screen comes
back.
_ Sec _
A display range of each secondary parameter is as follows:
Q, D
±
(0.00000 to 99999.9)

±
(0.000° to 180.000°)
Rs, Rp, X, Rdc
±
(0.000m  to 999.999M  )
G, B
±
(0.00nS to 9.99999kS)
Lp
±
(0.000nH to 99.9999GH)
The display range is limited by the measurement range.