NF ZM2371, Инструкция по эксплуатации

Страница: 111 / 255

4.6 Saving/Recalling the Setting and Correction Value into the Memory
4-24 ZM2371/ZM2372
4.6 Saving/Recalling the Setting and Correction Value into the
Memory
ZM2371 / ZM2372
enable save-/recalling the setting and correction value up to 32-set.

Saving the setting and correction value into the memory
_ SHIFT _ + [ SAVE ]
Press the
_ SHIFT _ + [SAVE]
keys to display the setting/correction value memory saving
setting menu.
S AV E : S e t t i n g
Current settable
0 t o 3 1 . ) C o r r e c t i o n - ) B o t h
range to be saved
Enter the target to be saved and the memory number, and press the
_ ENTR _
key, to carry
out saving (overwriting). After saving, the following confirmation message appears for a
short time and measurement screen comes back.
S a v e - > 9

Recalling the setting and correction value saved in memory
_ SHIFT _ + [ RECALL ]
Press the
_ SHIFT _ + [RECALL]
keys to display the setting/correction value memory recall
setting menu.
R E C A L L : S e t t i n g
Current settable
0 t o 3 1 . ) C o r r e c t i o n - ) B o t h
range to be saved
Enter the target to be recalled and the memory number, and press the
_ ENTR _
key, to
carry out recalling. After recalling, the following confirmation message appears for a short
time and measurement screen comes back.
R e c a l l < - 9
It is disabled to recall the setting and correction value memory, which are not being saved.
R e c a l l < - E M P T Y
The target for Save/Recall is Setting (only Setting) at first. Therefore, if you enter the
memory number and press the
_ ENTR _
key, only the setting can be saved or recalled. The
target can be temporarily changed into Correction (only correction value) or Both (both
ways) by entering the decimal point
_ . _
or negative sign
_ - _
.
R E C A L L : C o r r e c t i o n
Only correction value
Perform EXIT operation without performing saving or calling, and the measurement
screen will come back.
_ SHIFT _ _ . _ | [SAVE] _ - _ | [RECALL]