NF ZM2371, Инструкция по эксплуатации

Страница: 173 / 255

5.6 Command Explanation
5-46 ZM2371/ZM2372
<limit comparison result>
When the primary parameter or secondary parameter limit
comparison function is enabled, the limit comparison result is output
regardless of the setting of comparator function (bin sorting). The bin
sorting result of comparator is not output.
For BUF1 and BUF2, either <primary parameter comparison
result> or <secondary parameter comparison result> set
by :DATA:FEED command is output.
For BUF3, <primary parameter comparison result> and <secondary
parameter comparison result> are output.
<{primary|secondary}parameter comparison result> {numeric value,
format NR1, range see below}
0 Limit comparison function is disabled
1 IN (within the range of upper limit and lower limit)
2 HI (larger than upper limit)
4 LO (smaller than lower limit)
Query example1: :DATA? REF1
Response example1: +1.23456E-06
The reference value of primary parameter is 1.23456E-06.
Query example2: :DATA? BUF1
Response example2: Only one measured data is shown here as an example, when the
comparator function is enabled.
+0,+1.23456E-06,+2
No measurement error, Measured value = 1.23456E-06, Comparator’s
bin sorting result = Bin 2
Query example3: :DATA? BUF3
Response example3: Only one measured data is shown here as an example, when the limit
comparison function is enabled.
+0,+1.23456E-06,+1.43657E-03,+1,+2
No measurement error, Primary parameter 1.23456E-06, Secondary
parameter 1.43657E-03, Primary parameter limit comparison IN,
Secondary parameter limit comparison HI.