NF ZM2371, Инструкция по эксплуатации

Страница: 20 / 255

2.1 Checking Before Use
2-2 ZM2371/ZM2372
2.1 Checking Before Use

Safety check
Before using
ZM2371 / ZM2372 ,
make sure you read
“Safety Precautions”
, Located at the
beginning of this instruction manual and observe the required cautions.
Before turning the power on, read
“2.3 Grounding and Power Supply Connection”
and
observe the necessary cautions.

Unpacking
Check that the device has not been damaged during transit.
After unpacking, make sure that the contents listed in
“Table 2-1 Package Contents”
are
supplied.
Table 2
–1 Package contents
！
WARNING
This device contains high-voltage parts. Never remove the cover.
The internal parts of this device must only be serviced by an engineer who has a
thorough understanding of risk prevention.

Contents of CD-ROM supplied
• Application software
Main settings of
ZM2371 / ZM2372
, acquisition and display of measured data,
measurement and setting by sweeping the frequencies, and saving of measured data
can be performed.
• LabVIEW driver
The LabVIEW instrument driver that handles the
ZM2371 / ZM2372
main commands
and query is provided.
• Sample programs
An example of control of
ZM2371 / ZM2372
is shown using each interface of USB,
GPIB, and RS-232 in each programming language of C# , VB.NET and others.
This chapter describes the outline only. For detailed contents and handling method, refer to
the instructions stored in the CD-ROM.
ZM2371
or
ZM2372
Body ···················································· 1
Instruction Manual ··························································· 1
CD-ROM (Application Software, etc.) ··································· 1
Power Cord Set (3 Pole, 2 m) ············································· 1