NF ZM2371, Инструкция по эксплуатации

Страница: 40 / 255

3.3 Operation Tree
3-10 ZM2371/ZM2372
3.3 Operation Tree
An operation tree when
ZM2371 / ZM2372
is operated from the panel is shown below.
For the expression of operations, see
“3.5.2 Basic Key Operations”
.
Operation Tree (1/3)
_ FREQ _
: { Measurement frequency setting menu }
{ Measurement frequency input menu }
_ LEVEL _
: { Measurement signal level setting menu }
_ SHIFT _ + [ALC
] : { ALC setting menu }
{ Current setting menu }
_ BIAS _
: { DC bias setting menu }
{ DC bias voltage input menu }
_ SPEED _
: { Measurement speed setting menu }
_ SHIFT _ + [AVERAGE]
: { Averaging count setting menu }
_ Pri _
: { Primary parameter selection menu }
Direct selection
L / C / R /
· · ·
Auto selection Disabled / enabled
_ CKT _
: { Equivalent circuit selection menu }
Series / Parallel
Auto selection Disabled / enabled
_ SHIFT _ + [

Pri]
: { Primary parameter deviation display menu }
Display format selection
{ Reference value setting menu }
_ Sec _ :
{ Secondary parameter selection menu }
_ SHIFT _ + [

Sec]
: { Secondary parameter deviation display menu }
Display format selection
{ Reference value setting menu }
_ AUX DISP _
: { Auxiliary display setting menu } { Bin number input menu }
_ TRIG _
: Manual trigger
_ SHIFT _ + [TRIG MODE]
: { Trigger setting menu }
Trigger source selection
{ Trigger delay setting menu }
{ Triggered drive setting menu }
Continued