Motorola Netopia® Router CLI Commands 2-37
vlan
id
name
name
This command allows you to assign a free-form name
name
to a VLAN specified by
id
.
vlan
id
network
{
none
|
lan
|
eth2
|
eth3
|
eth4
|
eth5
|
eth6
|
eth7
}
This command allows you to define what additional LAN (ALAN) network is associated with the VLAN specified
by
id
.
vlan
id
id
{
1
..
4094
}
This command allows you to change the VLAN ID, which will effectively require you to refer to the VLAN by its
new VID after issuing this command.
Beginning with Firmware Version 8.7, a VID of zero (0) is permitted on the Ethernet WAN por t only.
vlan
id
8021x
authprofile
{
authprofile
tag
name
|
authprofile
id
}
This command allows you to enable 802.1x authentication for the VLAN specified by
id
. This option is only
suppor ted on Router models with VGx technology or single Ethernet por t models. If you are configuring a VLAN
for a Motorola Netopia
®
Router model with VGx technology (wired or wireless), you can specify a RADIUS ser ver
authentication profile for user authentication. This command allows you to associate a VLAN with an 802.1x
RADIUS authentication profile. You must create an authentication profile, if you have not already done so. See
“RADIUS Authentication Profile configuration commands” on page 2-39
.
Note:
If you enable 802.1x for a VLAN that includes a wireless SSID, you
must
set
wireless
privacy
to
WPA-802.1x
as well. See
“Wireless Privacy Commands (new and revised)” on page 2-91
. If multiple SSIDs are
split across several VLANs, the VLANs must either:
• all
have 802.1x enabled with WPA-802.1x enabled in Wireless Privacy, or
• have the VLANs set to 802.1x
dis
abled and
wireless
privacy
set to some other privacy setting. In that case
wireless
privacy
can be any setting.
Wireless does not currently suppor t separate privacy modes per SSID. When enabling WPA-802.1x, wireless will
default to the RADIUS configuration (see
“RADIUS Authentication Profile configuration commands” on
page 2-39
), unless it is par t of a VLAN. If it is par t of a VLAN it will use the VLAN authentication profile's
specified RADIUS ser ver.
vlan
id
interface eth
{
1
|
2
|
0/1
|
0/...
n
}
tag
{
yes
|
no
}
[
tos-priority
{
off
|
on
-} ]
[
iptos-promote
{
off
|
on
} ]
[
authprofile
{
name
|
id
} ]
[
inter-vlan-routing
{
group-1
...
group-8
}
enable
{
yes
|
no
} ]
no vlan
id
interface eth
{
1
|
2
|
0/1
|
0/...
n
}
These commands allow you to create or delete a VLAN specified by
id
on an Ethernet inter face indicated by its
inter face number. The option
eth 1
= Ethernet LAN;
eth 2
= Ethernet WAN, where applicable. If the Motorola
Netopia
®
Router model is a non-VGx model, the only available Ethernet por t is numbered
0/1
; for multiple
managed-switch VGx models the number
n
is the number of the physical Ethernet por t.
■
tos-priority
- allows you to enable or disable packet prioritization based on any 802.1p priority bits in the
VLAN header to prioritize packets within the Router’s internal queues, according to DiffSer v priority
Содержание CLI 874
