Netopia CLI 874, Справочное руководство CLI

Страница: 80 / 207

2-68 Command Line Interface Commands Reference
Unprotected Services Configuration Commands
Note:
These commands are suppor ted beginning with Firmware Version 8.7.4.
When using an IPSec force-all tunnel, Unprotected Ser vices suppor ts router-generated packets with a source IP
address outside the local member range. It works by applying a source address to an internally-generated
router
ser vice , and specifies whether the ser vice should not be routed by default over the force-all IPSec tunnel.
This permits suppor ting multiple authentication profles with multiple tunnels, as well as suppor ting
authentication profiles that point to a RADIUS ser ver on the LAN inter face. Other applications such as
, SNMP, syslog, NTP and hear tbeat are not forced over the tunnel.
ser vice interface [ ip_address | cp | ethernet ] [ number ]
show ser vice interface [ cp | ethernet ] [ number ]
no ser vice interface
These commands allow you to specify, show, or disable the application of a source address to an internally
generated router
ser vice , such that the ser vice should not be routed by default over a force-all IPSec tunnel.
Applicable internally-generated router ser vices are: RADIUS, , SNMP, syslog, NTP and hear tbeat.
■ interface specifies from where the traffic is to be sourced.
■ For cp or ethernet , the router will look up its inter face address, reducing the chance of error.
■ If you enter an ip_address that is not a local inter face address, the ser vice may either fail to function or the
router will override the invalid address. It will then use the inter face with a route to the ser ver for the
ser vice.
If no is used with the commands, the value goes back to the default 0.0.0.0 and no.
Note:
Only primar y Ethernet inter faces are suppor ted; ALANs are not suppor ted.
Examples:
remote-server interface 100.110.112.113
remote-server interface cp 3
remote-server interface ethernet 0
remote-server unprotected yes
Unprotected Services Configuration Commands
ser vice interface [ ip_address | cp | ethernet ] [ number ]
show ser vice interface [ cp | ethernet ] [ number ]
no ser vice interface
ser vice unprotected [ yes | no ]
show ser vice unprotected
no ser vice unprotected