3-14 Command Line Interface Commands Reference
cp
{
name
|
index
}
ip
netbios
proxy
enable
{
yes
|
no
}
no
cp
{
name
|
index
}
ip
netbios
proxy
enable
show
cp
{
name
|
index
}
ip
netbios
proxy
enable
These commands allow you to enable, disable, or show the NetBIOS proxy status for the specified Connection
Profile. The NetBIOS proxy enables the ability to for ward Windows Networking NetBIOS broadcasts. This is
useful for, for example, a Vir tual Private Network, in which you want to be able to browse the remote network to
which you are tunnelling, as par t of your Windows Network Neighborhood.
Routed connections, such as VPNs, can not use NetBEUI to carr y the Network Neighborhood information. They
need to use NetBIOS, because NetBEUI cannot be routed. This feature will allow browsing the Network
Neighborhood without any additional workstation configuration.
Note:
Microsoft Network browsing is available with or without a Windows Internet Name Ser vice (WINS)
ser ver. Shared volumes on the remote network are accessible with or without a WINS ser ver. Local LAN shared
volumes that have Por t Address Translation (PAT) applied to them are
not
available to hosts on the remote LAN.
For tunnelled traffic, NAT on the WAN has no effect on the Microsoft Networking traffic.
cp
{
name
|
index
}
ip rip receive
{
no
|
v1
|
v2
|
both
|
v2-md5
}
This command allows you to set the RIP receive behavior when the profile is used for a WAN connection.
cp
{
name
|
index
}
ip rip exclude-wan-routes
no cp
{
name
|
index
}
ip rip exclude-wan-routes
show cp
{
name
|
index
}
ip rip exclude-wan-routes
Note:
These commands are suppor ted beginning with Firmware Version 8.7.
These commands allow you to specify, disable, or show the status of broadcasting WAN routes via RIP. This is
available only if
rip transmit
is enabled for the connection profile. The default is
no
, but if enabled, will drop any
RIP routes with non-LANside information from RIP updates sent over the inter face.
cp
{
name
|
index
}
ip rip transmit
{
no
|
v1
|
v2broadcast
|
v2multicast
|
v2broadcast-md5
|
v2multicast-md5
}
This command allows you to set the RIP transmit behavior when the profile is used for a WAN connection.
Note:
If network address translation is enabled, RIP transmit is disabled regardless of the current setting of
this parameter.
cp
{
name
|
index
}
ppp authentication type
{
none
|
pap
|
chap
}
This command allows you to configure the type of authentication used by the profile.
cp
{
name
|
index
}
ppp authentication
{
send
|
receive
}
name
string
This command allows you to configure the send or receive PPP authentication name. The send name is used
when the remote side attempts to authenticate the Motorola Netopia
®
router, and the receive name is used
when the Motorola Netopia
®
router is attempting the authentication (for instance, if a WAN connection is being
established to the router).
Содержание CLI 874
