Netopia CLI 874, Справочное руководство CLI

Страница: 86 / 207

2-74 Command Line Interface Commands Reference
ip dns { 1 | 2 } ip-addr
no ip dns [ { 1 | 2 } [ ip-addr ] ]
show ip dns [ { 1 | 2 } ]
These commands allow you to set, change, delete, or show the router’s primar y and secondar y domain name
ser ver addresses.
ip domain-name string
no ip domain-name [ string ]
show ip domain-name
These commands allow you to set, change, delete, or show the domain name of the router. string can be up to
64 characters in length and may contain only valid domain name characters (alpha-numeric characters, dot
("."), and dash ("-"). Note that email addresses contain the at symbol ‘@’ and are not valid domain names.
ip gateway ip-addr
no ip gateway ip-addr
show ip gateway
These commands allow you to set, change, delete, or show the router’s default gateway.
backup gateway ip-addr
no backup gateway ip-addr
show backup gateway
This command allows you to set, change, delete, or show the router’s default backup gateway.
Global IP Configuration Commands (continued)
ip state-insp udp-timeout value
show ip state-insp udp-timeout
ip state-insp tcp-timeout value
show ip state-insp tcp-timeout
ip state-insp dos-detect value
show ip state-insp dos-detect
ip state-insp xposed-addr { [ ser ver-list-tag star t-ip-addr end-ip-addr ] }
{ [ protocol star t-por t end-por t ] }
no ip state-insp xposed-addr { [ ser ver-list-tag ] }
show ip state-insp xposed-addr abc