Motorola Netopia® Router Connection Profile Commands 3-31
cp
{
name
|
index
}
ipsec
dead-peer-detection
ping-reply-timeout
1..65535
show
cp
{
name
|
index
}
ipsec
dead-peer-detection
ping-reply-timeout
Note:
These commands are suppor ted beginning with firmware version 8.2
These commands allow you to specify or show the maximum period of time (in seconds) an IPsec tunnel
endpoint will wait for the peer’s response to its earliest ping request. If the peer does not respond within this
period, it is deemed to be a dead peer tunnel. Default is 90 seconds.
cp
{
name
|
index
}
ipsec
idle-timeout
{
non-negative-integer
|
none
}
show
cp
{
name
|
index
}
ipsec
idle-timeout
no
cp
{
name
|
index
}
ipsec
idle-timeout
These commands set or display the idle timeout associated with the specified IPSec connection profile. If the
IPSec
key-manager
associated with the connection profile is
manual
, then the idle-timeout value is meaningful
only if the
remote sg
is 0.0.0.0 or the empty string. In that case, the idle-timeout value specifies the period in
seconds during which the SPI (or SPIs) are bound to a par ticular remote peer in the absence of outbound traffic
through the IPSec tunnel. The value zero (or the keyword
none
) causes the SPI (or SPIs) to be permanently
bound to the first remote peer that sends traffic through the tunnel using the SPI (or SPIs). If the IPSec
key-manager
associated with the connection profile is
ike
, then the idle-timeout value specifies the period prior
to SA expiration during which there must be at least one outbound packet through the IPSec tunnel for a re-key
to be per formed one second prior to SA expiration. The value zero (or the keyword
none
) indicates that a re-key
should always be per formed one second prior to SA expiration even if there has been no outbound traffic
through the tunnel.
cp
{
name
|
index
}
ipsec
key-manager
{
manual
|
ike
}
show
cp
{
name
|
index
}
ipsec
key-manager
These commands set or display the IPSec key manager associated with the specified connection profile.
cp
{
name
|
index
}
ipsec
ike
phase1
{
name
|
index
|
none
}
show
cp
{
name
|
index
}
ipsec
ike
phase1
no
cp
{
name
|
index
}
ipsec
ike
phase1
These commands set, display, or disable the IKE Phase1 profile associated with the specified connection
profile. The IKE Phase1 profile may be specified either by index or by name.
cp
{
name
|
index
}
ipsec
pfs
{
yes
|
no
}
show
cp
{
name
|
index
}
ipsec
pfs
no
cp
{
name
|
index
}
ipsec
pfs
These commands set, display, or change the Phase 2 per fect for ward secrecy setting for the specified IPsec
Phase 2 profile.
Содержание CLI 874
