Netopia CLI 874, Справочное руководство CLI

Страница: 54 / 207

2-42 Command Line Interface Commands Reference
interface ethernet 0 address-serve netbios scope name domain-name
show interface ethernet 0 address-serve netbios scope name
These commands allow you to set or show the domain name under which the NetBIOS scope is enabled.
interface ethernet 0 address-serve netbios name-server enable { yes | no }
no interface ethernet 0 address-serve netbios name-server enable
show interface ethernet 0 address-serve netbios name-server enable
These commands allow you to set, delete, or show whether a NetBIOS name ser ver address is ser ved to
NetBIOS clients.
interface ethernet 0 address-serve netbios name-server address xxx.xxx.xxx.xxx [ secondary ]
show interface ethernet 0 address-serve netbios name-server address
These commands allow you to set or show the IP address of the NetBIOS name ser ver.
If the keyword secondary is specified and there is no primar y WINS ser ver the command will be rejected as
CLI_NO_CFG_SUPPORT_ERR , with the error message "; error 2: not suppor ted with current configuration“.