Netopia CLI 874, Справочное руководство CLI

Страница: 122 / 207

2-110 Command Line Interface Commands Reference
IP Network Address Translation (NAT) Commands
Overview
Network Address Translation (NAT) makes use of five basic structures:
■ “public” or externally visible address ranges
■ “map” rules that bind an interior, private address range with a public address range
■ “map-lists”, which are ordered lists of maps
■ “ser vers”, which define a mapping between a private IP address and por t and a public IP address (and the
same por t)
■
“ser ver-lists” which are lists of ser vers.
ip nat public tag dynamic from-address to-address
This command allows you to allocate a dynamic range of exterior, public addresses for use by Network Address
Translation. This range of addresses will be associated dynamically with private addresses you will define when
you create a map.
tag is the name you assign to the range, and it can contain up to 16 characters.
Example:
The following creates a dynamic public range of 8 addresses star ting at 163.176.12.1:
ip nat public "my second range" dynamic 163.176.12.1 163.176.12.8
IP Network Address Translation (NAT) Commands
ip nat public tag dynamic from-address to-address
ip nat public tag static pub-from-address pub-to-address
ip nat public tag pat { pub-address | 0.0.0.0 } [ from-por t to-por t ]
no ip nat public [ tag ]
ip nat map list-tag priv-from-address priv-to-address pool-tag
no ip nat map [ list-tag ]
show ip nat map list-tag
ip nat server list-tag priv-ip-addr pub-ip-addr { por t-name pub-star t-por t [ pub-end-por t ] }
{ both | tcp | udp } priv-star t-por t
no ip nat server [ list-tag ]
show ip nat server list-tag
show ip nat translation