Netopia CLI 874, Справочное руководство CLI

Страница: 155 / 207

Motorola Netopia® Router Connection Profile Commands 3-11
cp { name | index }
This command allows you to create a connection profile, which is a structure used to define WAN connections.
index can be any value from 1 to 16. The command has no effect if the profile already exists. The name of the
profile defaults to “profile index ” (e.g., “profile 1”).
no cp { name | index }
This command allows you to delete a connection profile.
cp { name | index } enable { yes | no }
This command allows you to enable or disable connection profile index. Use this command if you want to
temporarily disable a profile but do not want to lose its configuration.
cp { name | index } tag string
This command allows you to name connection profile string, which can be up to 32 characters long.
cp { name | index } dle { hdlc | ppp | frame-relay | rfc1483 | atmp | pptp | ipsec | l2tp }
This command allows you to set the encapsulation type that the connection profile will use when establishing a
WAN connection. Note that a profile whose encapsulation type is incompatible with the global encapsulation
type is essentially disabled and cannot be used. Also, when a profile is created, it inherits the global
encapsulation type by default and thus it is not usually necessar y to explicitly set this parameter.
Note:
atmfuni is accepted as a synonym for rfc1483 , and frame-relay is accepted as a synonym for rfc1490 .
l2tp is suppor ted beginning with Firmware Version 8.2.
Beginning with Firmware Version 8.3.1 , the following optional modifiers are permitted if the specified DLE is
ppp :
pppoe-enable [ { yes | no } ] { llcsnap | vcmux | vc-multiplexed }
and the following optional modifiers are permitted if the specified DLE is rfc1483 :
{ bridged | routed }
cp { name | index } pppoe pppoa-autodetect [ yes | no ]
show cp { name | index } pppoe pppoa-autodetect
Note:
These commands are suppor ted beginning with firmware version 8.5.
These commands allow you to enable, disable, or show the status of PPPoE/PPPoA autodetection.
If you are using PPP, and you have selected pppoe-enable , you can fur ther enable the ability to connect
automatically to your ISP’s central office equipment whether they are using PPP over Ethernet or PPP over ATM.
If your ISP is using PPPoE, the connection will be made normally. If your ISP is using PPPoA, when the Motorola
Netopia
®
Gateway detects this, it will automatically switch to PPPoA transparently.