Netopia CLI 874, Справочное руководство CLI

Страница: 121 / 207

Motorola Netopia® Router CLI Commands 2-109
traceroute [ hostname | ip-address ]
Note:
This command is suppor ted beginning with firmware version 8.5.
This command allows you to display the path to a destination by showing the number of hops and the router
addresses of these hops for each router encountered between the Motorola Netopia
®
Router and a destination
hostname or IP address. Firewalls or other security measures that block PING traffic also block traceroutes.
upgrade key-value
If the upgrade operation is successful the router will reboot. Other wise, an error will be returned. The key-value
argument is the upgrade key that was received when the upgrade was purchased.
upnp enable [ { yes | no } ]
no upnp enable
show upnp enable
Note:
These commands are suppor ted beginning with Firmware Version 8.3.3.
These commands allow you to enable, disable, or show the status of Universal Plug and Play. UPnP™ is a set of
protocols that allows a PC to automatically discover other UPnP devices (anything from an internet gateway
device to a light switch), retrieve an XML description of the device and its ser vices, control the device, and
subscribe to real-time event notification.
By default, upnp is enabled on the Motorola Netopia
®
Gateway.
For Windows XP users, the automatic discover y feature places an icon representing the Motorola Netopia
®
Gateway automatically in the “My Network Places” folder.
PCs using UPnP can retrieve the Gateway’s WAN IP address, and automatically create NAT por t maps. This
means that applications that suppor t UPnP, and are used with a UPnP-enabled Motorola Netopia
®
Gateway, will
not need application layer gateway suppor t on the Motorola Netopia
®
Gateway to work through NAT.
You must reboot the Motorola Netopia
®
device for this setting to take effect.