3-12 Command Line Interface Commands Reference
cp
{
name
|
index
}
filterset
string
no cp
{
name
|
index
}
filterset
[
string
]
show cp
{
name
|
index
}
filterset
These commands allow you to associate a filter set with the a connection profile. The filter set is identified by
name.
cp
{
name
|
index
}
ip addressing
{
numbered
|
unnumbered
}
This command allows you to specify whether or not the WAN inter face using this profile has an IP address. With
point-to-point connections, a WAN IP address is not necessar y for the router to function properly, but may be
required, depending on how the equipment at the other end is configured.
cp
{
name
|
index
}
ip address local
{
ip-addr
|
ip-addr
/
mask-bits
|
ip-addr mask
}
This command allows you to set the profile’s local WAN IP address.
cp
{
name
|
index
}
ip address remote
{
ip-addr
|
ip-addr
/
mask-bits
|
ip-addr mask
}
This command allows you to set the profile’s remote WAN IP address.
cp
{
name
|
index
}
ip
dhcp
client mode
{
standard
|
copper-mountain
|
cmn
}
show
cp
{
name
|
index
}
ip
dhcp
client mode
These commands allow you to set or show the router’s DHCP mode, whether
standard
,
copper-mountain
, or
cmn
.
The connection profile, default profile, and IP configuration structures now include a
dhcp
client
mode
setting
that selects between the
standard
RFC 2131 standards-based mode of operation (the default), and the
cop-
per-mountain
or
cmn
proprietar y mode of operation.
When the DHCP client is activated on a RFC1483 MER inter face, it examines the
dhcp
client
mode
in the
associated connection profile (or the default profile there was no explicitly configured connection profile). If the
dhcp
client
mode
specifies
standard
, the DHCP client initializes the htype and hlen fields in the header of its
DHCP requests to the appropriate values for an RFC1483 MER inter face (htype = 1 and hlen = 6). If the
dhcp
client
mode
specifies
copper-mountain
or
cmn
, the DHCP client initializes the htype and hlen fields in the
header of its DHCP requests to zero.
When the DHCP client is activated on an Ethernet WAN inter face, it examines the
dhcp
client
mode
in the
associated IP configuration structure, and behaves as described above for the RFC1483 MER DHCP client.
Note:
cmn
is accepted as a synonym for
copper-mountain
.
show
cp
{
name
|
index
}
ip
dhcp
client
status
Note:
The command above is suppor ted beginning with firmware version 8.5.
This command allows you to display the status of the ethernet WAN being ser ved via DHCP for the specified
connection profile. It displays:
IP Address
IP Subnet Mask
Содержание CLI 874
