Motorola Netopia® Router CLI Commands 2-29
interface ethernet
id
ip filterset
fs-id
no interface ethernet
id
ip filterset
show interface ethernet
id
ip filterset
These commands allow you to enable, disable, or show an IP filterset identified by
fs-id
on the specified
Ethernet inter face.
fs-id
is specified as an ASCII string corresponding to the name of a filterset. See
“IP Filterset
Configuration Commands” on page 2-121
for more information.
interface
ethernet
id
ip nat enable
{
yes
|
no
}
no interface
ethernet
id
ip nat enable
show interface
ethernet
id
ip nat enable
These commands allow you to enable, disable, or show the Network Address Translation behavior for the
specified WAN inter face.
interface ethernet
id
ip nat map-list
list-tag
no interface ethernet
id
ip nat map-list
show interface ethernet
id
ip nat map-list
These commands allow you to set, delete, or show a NAT map list for the specified WAN inter face.
interface
ethernet
wan-id
ip
nat
passthrough
enable
{
yes
|
no
}
no interface ethernet
id
ip nat passthrough enable
show interface ethernet
id
ip nat passthrough enable
Note:
These commands are suppor ted beginning with firmware version 8.2.
These commands allow you to enable, disable, or show the NAT passthrough behavior for the specified WAN
inter face. The IP passthrough feature allows for a single LAN PC to have the router’s public address assigned to
it, in addition to providing PAT (NAPT) via the same public IP address for all other hosts on the private LAN
subnet.
interface
ethernet
wan-id
ip
nat
passthrough
dhcp
enable
{
yes
|
no
}
no
interface
ethernet
wan-id
ip
nat
passthrough
dhcp
enable
show
interface
ethernet
wan-id
ip
nat
passthrough
dhcp
enable
Note:
These commands are suppor ted beginning with firmware version 8.2.
These commands allow you to enable, disable, or show the NAT passthrough DHCP behavior for the specified
WAN inter face. This governs DHCP addressing for the passthrough host.
interface
ethernet
wan-id
ip
nat
passthrough
dhcp
mac-address
{
mac-address
}
show
interface
ethernet
wan-id
ip
nat
passthrough
dhcp
mac-address
Note:
These commands are suppor ted beginning with firmware version 8.2.
These commands allow you to set or show the NAT passthrough DHCP MAC address for the specified WAN
inter face. This specifies the MAC address of the passthrough host.
Содержание CLI 874
