NETGEAR (LG2200D Скачать руководство пользователя страница 94

Страница: 94 / 135

Administration

U.S. Cellular® 4G LTE™ Router (LG2200D)

Operator

. The Internet service provider name that has connected.

Network Mode

. The technology used for mobile network connectivity.

•

Wireless Broadband Port

. The basic information for the mobile interface.

Connection Status

IP Address

. The IP address from the ISP when the modem is used as the WAN

interface.

Protocol

. The mobile protocol, DHCP or PPTP.

IP Subnet Mask

. The IP subnet mask used by the wireless broadband port of the

router.

Gateway IP Address

Domain Name Server

. The Domain Name Server addresses used by the router.

A Domain Name Server translates human-language URLs such as

www.netgear.com into IP addresses.

•

LAN Port

MAC Address

. The Media Access Control address. This is the unique physical

address used by the Ethernet (LAN) port of the router.

IP Address

. The IP address used by the Ethernet (LAN) port of the router. The

default is 192.168.0.1.

DHCP

. Identifies whether the router’s built-in DHCP server is active for devices on

the LAN.

IP Subnet Mask

•

Wireless Port

Name (SSID

). The wireless network name (SSID) that the router uses.

Region

. The geographic region where the router is being used.

Channel

. The operating channel of the wireless port being used. The default

channel is Auto. When Auto is selected, the router finds the best operating
channel available.

Mode

. The wireless communication mode: 300 Mbps, 145 Mbps, or Up to 54

Mbps.

Wireless AP

. Indicates whether the radio feature of the router is enabled. If this

feature is not enabled, the WiFi LED on the front panel is off.

Broadcast Name

. Indicates whether the router is broadcasting its SSID.

View Mobile Broadband Status



To view mobile broadband status:

Launch an Internet browser from a computer or wireless device that is connected to the
network.

Enter

http://www.routerlogin.net

http://www.routerlogin.com

Содержание (LG2200D








































































































































Результаты поиска

Содержание (LG2200D

Отзывы:

Похожие инструкции для (LG2200D

Бренды по названию

Популярные бренды

NETGEAR (LG2200D, Руководство пользователя

Результаты поиска

Содержание (LG2200D

Отзывы:

Похожие инструкции для (LG2200D

Бренды по названию

Популярные бренды