drive-removal procedures. Never ship a 60-drive tray with drives installed. See
Procedure -
Removing drives from a 60-drive tray
for instructions on how to remove the drives from the 60-
drive tray.
Steps
1. Unlatch the top drive drawer by pulling out on both levers at the front of the drawer.
2. Using the extended levers, carefully pull the drive drawer out until it stops. Do not completely
remove the drive drawer from the controller-drive tray.
3. Starting with the first drive, raise the drive handle to the vertical position.
4. Align the two raised buttons on the drive with the notches on the drawer.
5. Starting with the leftmost slot at the front, align the two raised buttons on the drive with the
notches on the drawer. Then, pressing gently on the top of the drive, rotate the drive handle down
until the drive snaps into place.
Step 4 - Installing the controller-drive tray | 51
Содержание E2760
Страница 2: ......
