4. Position the mounting rails in the cabinet. For more information, refer to the installation
instructions that are included with your mounting rails.
1
Mounting rail
2
Existing tray
3
Clearance above and below the existing tray
4
Screws for securing the mounting rail to the cabinet (front and rear)
5
Industry-standard cabinet
•
If you are installing the mounting rails above an existing tray, position the mounting rails
directly above the existing tray.
•
If you are installing the mounting rails below an existing tray, allow 8.7-cm (3.4 in.) clearance
below the existing tray for the E2712 controller-drive trays and 8.9-cm (3.5 in.) for the E2724
controller-drive trays.
Attention:
Risk of equipment malfunction – To avoid exceeding the functional and
environmental limits, install only drives that have been provided or approved by NetApp, Inc.
Not all controller-drive trays are shipped with pre-populated drives. System integrators,
resellers, system administrators, or users of the controller-drive tray can install the drives.
5. Attach the mounting rails to the cabinet.
a. Ensure that the adjustment screws on the mounting rail are loose so that the mounting rail can
extend or contract as needed.
36 | E2700 Controller-Drive Tray and Related Drive Trays Installation Guide
Содержание E2760
Страница 2: ......
