•
Installing a drive in the E2724 controller-drive tray
1
Drive handle
Note:
In some applications, the drive handle might have the hinge on the right.
3. Install the second drive beneath the first drive (E2712 controller-drive tray) or to the right of the
first drive (E2724 controller-drive tray).
4. Install the other drives from top to bottom and then from left to right (E2712 controller-drive tray)
or to the right (E2724 controller-drive tray).
Procedure - Installing the E2760 controller-drive tray
About this task
Attention:
Risk of equipment malfunction – To avoid possible equipment damage and ensure
safe and efficient servicing of the equipment, install the 60-drive trays toward the bottom of a
cabinet.
You can install the controller-drive tray into an industry-standard cabinet, provided it has a depth of
100 cm (40 in.). A minimum depth of 76 cm (30 in.) between the front EIA support rails and the rear
EIA support rails is required.
Note:
If you are installing the controller-drive tray in a cabinet with square holes, use the eight
conical washers in the rail kit to align the screws in the holes (see step
4
through step
7
).
Steps
1. Ensure that the cabinet is in the final location and you meet the clearance requirements shown in
the following figure.
42 | E2700 Controller-Drive Tray and Related Drive Trays Installation Guide
Содержание E2760
Страница 2: ......
