NetApp E2760, Руководство по установке

Страница: 103 / 137

Location LED Color On Off
8 Host
Interface
Card Link 6
Active LED Green The link is up (LED
blinks when there is
activity). The link is not active.
9 Expansion
Port 1 Fault
LED Amber At least one of the four
PHY is working, but
another PHY cannot
establish the same link to
the device connected to
the Expansion OUT
connector. Normal status.
10 Expansion
Port 1 Active
LED Green At least one of the four
PHYs in the OUT
connector is working and
a link has been made to
the device connected to
the Expansion connector.
(LED blinks when there
is activity.) The link is not active.
11 Expansion
Port 2 Fault
LED Amber At least one of the four
PHY is working, but
another PHY cannot
establish the same link to
the device connected to
the Expansion OUT
connector. Normal status.
12 Expansion
Port 2 Active
LED Green At least one of the four
PHYs in the OUT
connector is working and
a link has been made to
the device connected to
the Expansion connector.
(LED blinks when there
is activity.) The link is not active.
* If you have a two-port SAS HIC, Ch 5 and Ch 6 are not available. LEDs 5, 6, 7, and 8 are not
on the subplate.
• LEDs on the controller canister – FC host interface card subplates
Step 10 - Turning on the power and checking for problems in a controller-drive tray configuration | 103