NEC PG-FP4 Скачать руководство пользователя

Страница: 83 / 117

CHAPTER 6 PG-FP4 OPERATION IN STANDALONE MODE

User’s Manual U15260EJ3V1UM

A command prompt ‘>’ displayed at the end of a menu line indicates that the menu can be selected by the Enter

button, or that the menu (command) can be executed.

If the command prompt ‘>’ is not displayed at the end of a menu line, it means that the function is only displayed.

When power to the PG-FP4 is turned on, the following message is displayed on the message display with the

status LED remaining dark.

‘Commands >’

The status LED indicates the status of communication with the device and the result of execution, as follows.

Status LED

Status

Orange

The selected command is under execution.

The details of the execution status will be displayed on the message display.

Green

The selected command has been executed correctly.

The command that has been correctly executed will be displayed on the message display.

Red

The selected command has been terminated by an error.

The details of the error will be displayed on the message display.

6.1

PG-FP4 Operation Menu

In the standalone mode, the writing environment of the target device can be checked and rewritten by using the

commands explained in this section.

6.1.1 [Commands]

menu

The [Commands] menu offers various commands necessary for rewriting the target device. Select a command

from this menu and press the Enter button. The PG-FP4 will then execute the command to the target device.

For the details of command execution, refer to

4.4.3 [Device] menu

[Commands >]

•

Pressing the Next button displays the Type Setting menu.

•

Pressing the Enter button displays the next command of the [Commands] menu that can be executed.

•

The Cancel button is invalid.

[

E.P.V >

]

When the Enter button is pressed next, the target device connected to the PG-FP4 is

erased, programmed, and verified

Note

↓

Next button

Note

Download a user program in advance in the GUI software mode.

This is valid for the programming area (Chip, Block and Area) currently set for the PG-FP4.

Содержание PG-FP4






















































































































Результаты поиска

Содержание PG-FP4

Отзывы:

Похожие инструкции для PG-FP4

Бренды по названию

Популярные бренды

NEC PG-FP4, Руководство пользователя

Результаты поиска

Содержание PG-FP4

Отзывы:

Похожие инструкции для PG-FP4

Бренды по названию

Популярные бренды