NEC PG-FP4, Руководство пользователя

Страница: 62 / 117

CHAPTER 4 PG-FP4 OPERATION USING GUI SOFTWARE
User’s Manual U15260EJ3V1UM
62
[Pulse number]
Displays the number of V
PP
or FLMD0 pulses corresponding to the selected communication mode.
[Speed list box]
Select the communication rate of the selected communication channel from the following.
<When SIO-ch0, SIO-ch1, SIO-ch2, or SIO-H/S is selected>
2.4 kHz
9.8 kHz
39 kHz
156 kHz
625 kHz
2,500 kHz
<When IIC-ch0, IIC-ch1, IIC-ch2, or IIC-ch3 is selected>
10 k baud
20 k baud
50 k baud
100 k baud
<When UART-ch0, UART-ch1, UART-ch2, or UART-ch3 is selected>
9,600 baud
19,200 baud
31,250 baud
38,400 baud
76,800 baud
153,600 baud
<When Port-ch0, Port-ch1, or Port-ch2 is selected>
100 Hz
200 Hz
300 Hz
400 Hz
500 Hz
600 Hz
800 Hz
1,000 Hz
1,200 Hz
1,500 Hz
[IIC Address]
If I
2
C is selected as the programming channel, input a slave address as a hexadecimal number. The valid
range of input is 8 to 77H. Do not input a unit.
The slave address can be any value in the above range but must not be the same as the slave address of
another device on the I
2
C.
This field cannot be accessed if the I
2
C port is not selected.